Basic Info.
Model NO.
MS-1317
Morphology
Paste
Application
Construction, Woodworking, Home Decoration
Material
Silicone
Classification
Room Curing
Main Agent Composition
Modified Silane
Characteristic
Weatherability
Promoter Composition
Tackifier
Composition
Organic Material
Color
Grey
Component
One Component
Curing Conditions
Moisture Curing
Colors
White/Grey/Black
Feature1
Formaldehyde-Free
Feature2
Strong Adhesion
Feature3
Strong Aging Resistance
Voc
≤50g/L
Transport Package
Carton
Specification
280ml/300ml/310ml/590ml/600ml
Trademark
AEP
Origin
Xiamen, China
HS Code
3506100010
Production Capacity
10000 Tons
Packaging & Delivery
Package Size
36.00cm * 26.00cm * 21.00cm
Package Gross Weight
17.300kg
Product Description
About Products:
The one-component anti-mildew caulking adhesive based on Polyether modified silane has a bright surface, anti-fouling and anti-mildew, good sealing performance and wide bonding range.
The main purpose:
It is used for sealing, waterproofing, and moisture-proofing of home decoration, kitchen and bathroom lines, shower rooms, etc. It can also be used for beautiful seams of lines.
The one-component anti-mildew caulking adhesive based on Polyether modified silane has a bright surface, anti-fouling and anti-mildew, good sealing performance and wide bonding range.
The main purpose:
It is used for sealing, waterproofing, and moisture-proofing of home decoration, kitchen and bathroom lines, shower rooms, etc. It can also be used for beautiful seams of lines.
| MS Caulking Adhesive - TDS Forms | ||||||||||
| Test items | Technical indicators | Note | ||||||||
| Appearances | Colors | Black/White/Grey | Colours can be customised | |||||||
| State | Delicate cream | Visual assessment | ||||||||
| Density | g/cm³ | 1.4±0.1 | GB/T14683.2 | |||||||
| Extrusion rate | ml/min | ≥450ml/min | GB/T 13477.3 | |||||||
| Shifting | vertical sag | ≤1mm | GB/T 13477.6 | |||||||
| Curing speed | Surface drying time | 40~100min | GB/T 13477.6 | |||||||
| Initial 24 hour cure depth | ≥2mm | |||||||||
| Hardness | Shore A | 50±5A | GB/T531-2008 | |||||||
| Tensile Stress Strain | Tensile strength(TS) | ≥0.75Mpa | GB/T14683.8 | |||||||
| 100% Tensile strength(M100) | About 0.30 Mpa | |||||||||
| Elongation at break EB (%) | ≥400% | |||||||||
| Elastic recovery rate | According to the 25LM class | ≥75% | GB/T13477.17 | |||||||
| Constant elongation bonding | Substrate: Concrete mortarboard | Non-destructive | GB/T 13477.10 | |||||||
| Adhesion after cold pulling and hot pressing | Substrate: Concrete mortarboard | Non-destructive | GB/T 13477.13 | |||||||
| Elongation bonding after immersion in water | Substrate: Concrete mortarboard | Non-destructive | GB/T 13477.14 | |||||||
| Curing Shrinkage | Quality loss rate | ≤3% | GB/T 13477.19 | |||||||
Instructions for use
1.Before construction, the grass-roots level will be cleaned up, no dust, oil and other substances that affect the bonding strength.
2.This product can be used for spot gluing, the spot gluing area should be not less than 10% of the pasted area; you can also use the following 4mm tooth-shaped trowel to pull the teeth of the full scraping and paving, after the completion of the adhesive layer thickness of up to 3mm is good.
3.Adjustment should be completed within ten minutes after dispensing.
4.The product room temperature curing, surface drying time: 45Min, full curing time: 72h.
5.Application temperature range: -40ºC-+100ºC.
Precautions
1.Prohibit contact with water, steam, alcohol solvents (such as alcohol).
2.Construction temperature of 5-32 ºC is preferred.
3.We should wear gloves, masks, etc. for protection when using to prevent allergic reactions.
4.in order to prevent the liquid into the eyes caused by allergies, you can wear an eye mask when dispensing.
5.After construction, it is advisable to wash hands before drinking or eating to avoid ingesting glue components.
6.The product should be stored in a ventilated, dry, cool place, prevent direct sunlight, storage temperature 8-28 ºC.
Features:
1.Bright surface, hard as porcelain
2.Dry in ten minutes
3.Green and Low VOC
4.Good sealing
5.Long-lasting anti-mildew
6.Waterproof and stainproof
7.Can be used on walls and floors
1.Bright surface, hard as porcelain
2.Dry in ten minutes
3.Green and Low VOC
4.Good sealing
5.Long-lasting anti-mildew
6.Waterproof and stainproof
7.Can be used on walls and floors
The company takes customer as the centre, quality as the fundamental, innovation as the vitality, and is committed to developing into an adhesive enterprise trusted by customers. We have won the honours of National High-tech Enterprise, Xiamen High-tech Enterprise, Growing Enterprise, Speciality and New Enterprise, Intellectual Property Demonstration Enterprise, New Material Enterprise, and Demonstration Enterprise of Scientific and Technological Project Products.
Q1.:Can I get the Adhesive samples?A1.:Sure,We can provide you free samples.
Q2.:How to find the most suitable product for me?
A2.:Please tell us about the use or application of the adhesive you are purchasing, and we will recommend the right adhesive for you.
Q3.:Can you provide OEM service?
A3.:Yes, we can provide you with OEM service to customise your own branding and outer packaging.
Q4.:What is your delivery time?
A4.:For OEM order,delivery in 20-30 days.
Q5.:What is your terms of payment?
A5.:30% deposit in advance,70% paid in before shipment.
Q6.:What is the shelf life of your product?
A6.:12 months.